Termite damage
I’ve had a lot of experience with repairing termite damage . It has usually been a result of poorly primed and painted wood on windows, doors, fascia, eves and thresholds. Here are a few before and after pictures from termite damage on windows that I’ve repaired in the Los Angeles area.
This is one of the window sashes that I repaired prior to the repair. If you zoom in on the picture, you can get an idea of just how bad the termite damage is. They nearly ate entirely through the cross member of the frame. This next picture is how the frame looked after I was done filling the affected areas with Bondo and then sanding and priming. Please keep in mind that this isn’t even my best work. I’ve done many of these jobs where you can’t even tell it was repaired at all and this includes intricate moldings, where I’ve had to make custom sanding blocks to conform the Bondo to the existing contours.
Here is another window that I worked on in the Venice area that had pretty bad termite damage
And here is how the sill looked after I was done. You can see that it’s the same window by noticing the gate down below that was at the back of the house I was working on.


[…] Termite damage deserves the same level of attention. A window casing can look intact while the lower trim or framing behind it has been hollowed out. The repair has to remove unsound material and reconnect the replacement wood to solid structure. Covering damaged wood with trim only moves the problem out of sight. […]
[…] Before choosing a replacement threshold, I check the condition and movement of the door itself. A threshold cannot compensate for a door that has dropped on loose hinges, a warped bottom rail, or a jamb that has been damaged by moisture or termites. […]